Installing blackout blinds at your home is not as easy as installing Roman blinds or roll-up blinds. Sometimes, a lot of complications occur in installing the blackout blinds at home in Hull. Many people who have blackout blinds in Hull often take the help of professional window blind installers for installing these blinds rather than doing it themselves.
Before installing the blackout blinds, correct measurement is required. If not measured properly, you will end up damaging either the blind or the window.
Measuring Tips
- Measure the width and height at three places (top, middle, bottom for width, left, centre, right for height).
- For an inside mount, use the smallest width and height so the shade fits inside the frame.
- For an outside mount, add a couple of inches on each side to stop light from coming through the edges.
Inside vs Outside Mount
Inside mount: Gives a clean, built-in look, but might let some light in around the edges.
Outside mount: Better for true blackout because it covers the frame and stops light from leaking through the sides.
Installation Tips
Make sure you have the basics ready: a level, drill (unless it's a no-drill option), screwdriver, pencil, and measuring tape.

Comments
Post a Comment